Home Page
About Us
Contact Us
Twitter
Facebook
TimeandAttendance.ie  
  Waterford 051 374988
  Dublin 01 5563420
  Cork 021 2021160
Time and Attendance
Clocks & Software
Clocking Terminals
T3203 Smart Card Terminal
T3204 Biometric Terminal
HandPunch 3000e Biometric
Smart Cards
Software
Tensor.NET Software
Employee Self Service
Smartphone Self Service
Job Costing
Access Control
Hardware & Software
Hardware
Door Controllers
Card Readers
Biometric Readers
Smart Cards
Software
WinAC.NET
Visitor Management
Human Resources
Software
Absence Management
Software
Case Studies
Our Customers
Card Readers
Home
Card Readers
T1488 Proximity Card Reader
Reads 37 bit Tensor format proximity cards.
Send and receive data to and from host using RS485 interface.
Audio and visual indication of card read.
LED indicators for:IN
INVALID
OUT
Fitted with a hard wired 6 core cable of length 10 metres.
Support ESD protection requirements.
To connect to the T8526 series controller product.
Receiver Class3 (EN300 330)
Voltage 11 VDC to 14 VDC
Current 150mA MAX
Power 1.56W
Duty Cycle 100%
Temperature operational -15 °C to +55 °C
Humidity 5% to 95%
Protection IP55
T149X Proximity Card Reader
T1491 standard 60mm centre, 75mm x 75mm x 25.
Reads 128 bit Contactless Identification cards.
Send and receive data to and from host using RS485 interface.
Audio and visual indication of card read.
LED indicators for:IN
INVALID
OUT
Fitted with a hard wired 6 core cable of length 10 metres.
Fitted with tamper detection.
To connect to the T8526 series controller products.
Receiver Class3 (EN300 330)
Voltage 11 VDC to 14 VDC
Current 150mA MAX
Power 1.56W
Duty Cycle 100%
Temperature operational -15 °C to +55 °C
Humidity 5% to 95%
Protection IP55
T159X Proximity Card Reader
T1591 Slim mullion, 45mm x 85mm x 21.
Reads 128 bit Contactless Identification cards.
Send and receive data to and from host using RS485 interface.
Audio and visual indication of card read.
LED indicators for:IN
INVALID
OUT
Fitted with a hard wired 6 core cable of length 10 metres.
Fitted with tamper detection.
To connect to the T8526 series controller products.
Receiver Class3 (EN300 330)
Voltage 11 VDC to 14 VDC
Current 150mA MAX
Power 1.56W
Duty Cycle 100%
Temperature operational -15 °C to +55 °C
Humidity 5% to 95%
Protection IP55